Advance Innovative Materials LLC : Formulated Resins

AIM Aliphatic EP Binder

AIM Aliphatic EP Binder is a clear high performance, solvent free, epoxy coating/sealer and is also suitable for use as a binder and sealer for decorative floor systems. It has exceptional UV, yellowing and chalking resistance. It is suitable for use ex
View Properties

AIM Anchor Grout Epoxy

AIM Anchor Grout Epoxy is a pure epoxy resin grout use for general purpose horizontal and vertical anchoring in rock, concrete, brick or solid masonry.
View Properties

AIM Anchor Grout Polyester

AIM Anchor Grout Polyester is a styrene-free polyester resin grout packed with activator in an easy-to-use self mixing cartridge
View Properties

AIM EP10

AIM EP10 is a pure, low viscosity epoxy resin for structural sealing of cracks in concrete and as a thin section (0.2 to 15mm) base plate grout.
View Properties

AIM Epoxy Primer MT

AIM Epoxy Primer MT is a high penetration primer suitable for use with a wide range of epoxy coatings and floor sys- tems on substrates that have a high moisture content.
View Properties

AIM PCA

AIM PCA activated manganese oxide cure paste functions as an oxidizing agent to cure the polysulphide resins, by producing disulphide cross linked elastomer. Being oxide cured, the cross linked sealant is highly resistant to UV and weathering.
View Properties

AIM PU Binder

AIM PU Binder is non-hazardous, fast curing, flexible, solvent free resin for use with resin bound stone carpet systems and other decorative stone/sand finishes.
View Properties

AIM PU Binder 90

AIM PU Binder 90 is a fast curing, flexible, solvent free resin for use with resin bound stone carpet systems and other decorative stone/sand finishes.
View Properties

AIM PU401

AIM PU401 is a two part solvent and phthalate free, low viscosity polyurethane resin system. When mixed in the proportions supplied it reacts to form a permanent seal and restores structural integrity to the injected element.
View Properties

AIM Stone Carpet Binder

AIM Stone Carpet Binder is UV resistant flexible advanced resin system developed specifically for stone carpet systems for use in hot tropical climates.
View Properties

AIM SwellSeal

AIM SwellSeal is a high performance polymer adhesive and sealant that is used in conjunction with AIM HWS waterstops.
View Properties

AIM PU100

Low viscosity, foaming, polyurethane injection resin to stop water leaks in concrete.
View Properties

AIM PU201 & 202

Low viscosity, flexible polyurethane injection resin system for dry, damp or wet cracks in concrete.
View Properties

AIM PU301 & 302

Dual function polyurethane injection resin to stop water leaks and seal cracks in concrete. AIM PU301 (Base:Hardener 1:1 by volume) | AIM PU302 (Base:Hardener 2:1 by volume)
View Properties

AIM PU400

Injecting cracks in dry, damp & wet cracks in concrete structures to provide a rigid, structural seal.
View Properties

AIM AP500

Very low viscosity, hybrid polyurea – acrylic gel for sealing water leaks in below-ground structures and stabilizing the surrounding ground.
View Properties

AIM PU600

Rapid foaming, short pot life polyurethane resin.
View Properties

AIM EP20 & EP21

Low viscosity epoxy injection resin. AIM EP20 (Base:Hardener 2:1 by volume) | AIM EP21 (Base:Hardener 1:1 by volume)
View Properties

AIM Aliphatic PU HB

AIM Aliphatic PU HB is a high performance pigmented polyurethane coating that is also decorative and suitable for use in a wide range of applications.
View Properties

AIM Fuel Resistant PU Joint Sealant

Jet fuel and blast resistant joint sealant
View Properties

AIM Fuel Resistant PS Joint Sealant

Jet fuel and blast resistant joint sealant
View Properties

AIM PS 1K Sealant Primer

High performance primer for AIM Fuel Resistant PS Joint Sealant
View Properties

AIM PU 1K Sealant Primer

High performance primer for AIM Fuel Resistant PU Joint Sealant
View Properties